Replacement engine from 04 passet 1.9td redeye

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Post Reply
User avatar
dickspanner
Registered user
Posts: 395
Joined: 27 Mar 2006, 09:17
80-90 Mem No: 4641
Location: Just outside Bury

Replacement engine from 04 passet 1.9td redeye

Post by dickspanner »

Ok. Basic question. I have been offered a 1.9passat on 04 place. It is a 1.9 turbo diesel "redeye".

Ignoring electrical issue at moment.

Does anybody know if a jx sump will fit? Is there anything else I should consider except sump and pick up pipes?

The jx turbo filled and hydrated. It is a can of work companies to doing a full swap.

Cheers

Dickspanner
Crewwy now running a 2.9litre 24V V6 Injection Cosworth motor.Oh the Joy. Happy Happy Joy Joy. Mmmmmmmmm

0 to loud with a big grin

Member number 4641

D I C K Spanner

User avatar
syncroandy
Trader
Posts: 1857
Joined: 18 Oct 2005, 18:15
80-90 Mem No: 851
Location: North Lancs. UK
Contact:

Re: Replacement engine from 04 passet 1.9td redeye

Post by syncroandy »

T3 parts unsuitable / incompatible with an '04 1.9 TDI (PD):

sump
engine mountings
flywheel / clutch
transmission

bellhousing bolt pattern is the same but an adapter plate would be required to run it upright
inlet / exhuast / turbo / cooling system all different and would require all new plumbing / fabrication
in addition there's the EGR system and fuel cooling system to deal with
electrically its drive-by-wire & Canbus based with various dependencies between the engine ECU and other modules which would need coding out or other mods to get it running without fault codes
Syncrosport
Volkswagen Transporter, reloaded.

252 GC5 EJ25 AAN L90D
246 097 AFN AVL+ L90D
Syncronaut #004

Post Reply