I have a 1986 T25 which did have the 1.6 TD (JX). The headgasket was gone and other issues with the engine, so I have sourced and put in a nice 1.9D (1Y) engine.
I've just had the van back from the garage and the gearbox is now leaking... Second gear slips out (it did before the new engine though) and I'm thinking it may be wise to get a new/recon gearbox.
Any advise on where I might source a second hand gearbox and what type to look for would be hugely appreciated.
Cheers in advance for any help!
Matt
1Y engine in, now need suitable GEARBOX.. Advise please?
Moderators: User administrators, Moderators
- Aidan
- Trader
- Posts: 6557
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: 1Y engine in, now need suitable GEARBOX.. Advise please?
Mick at VWNW ?
4 speed petrol ABD box will be fine with the bellhosuing and input shaft swapped
you did fit a spigot bearing didn't you ?
4 speed petrol ABD box will be fine with the bellhosuing and input shaft swapped
you did fit a spigot bearing didn't you ?
- Rogue Trooper
- Registered user
- Posts: 92
- Joined: 13 Mar 2010, 23:26
- 80-90 Mem No: 12340
- Location: Amesbury Wilts
Re: 1Y engine in, now need suitable GEARBOX.. Advise please?
Which spigot bearing should be fitted?
Syncro (belong to Prof Mick Aston & Prof Alice Roberts)
Single Cab "Panzerakete"
Single Cab "Panzerakete"
- Aidan
- Trader
- Posts: 6557
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: 1Y engine in, now need suitable GEARBOX.. Advise please?
the' diesel' one in an inline 4 engine see the pics on the wiki