jx t2 garrett inlet elbow split.

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Post Reply
dazzerT251900td
Registered user
Posts: 30
Joined: 20 Jun 2010, 16:42

jx t2 garrett inlet elbow split.

Post by dazzerT251900td »

Hi people.

I wonder if you could help me. My inlet elbow to my JX turbo is split. I was wondering where I could get a new one from. Mine has a breather pipe connected to it from the rocker cover. So will this be the same as on brickwerks website and ebay ? It seems to be very difficult to get off because of the engine mounting which is in the way. My JX turbo /manifold is connected to my AAZ engine. There looks to be a breather connection on the pipe from air filter to inlet elbow but this is blanked off. Could I put the breather pipe from rocker cover to this blanking connection? If my new inlet elbow hasn't got a breather connection?

Kind regards

Darren Clarke

p.s. Its split underneath the jubilee clips ( underneath the breather inlet and the jubilee clip connecting to the turbo).

Post Reply