You won't get your money back from selling it for sure, the markets slumped as the pandemic is over. Syncros are still going for daft money but thats about it.
With bodywork still to be done you aren't gonna get top dollar if you sell.
Search found 1132 matches
- 02 May 2024, 08:41
- Forum: Any Other Matters
- Topic: Knocking from ventilation system
- Replies: 21
- Views: 6831
- 01 May 2024, 23:46
- Forum: Any Other Matters
- Topic: Knocking from ventilation system
- Replies: 21
- Views: 6831
Re: Knocking from ventilation system
£70?... Wow, my garage only charge £45 per hour. My friend has replaced a lot more panels and done a proper respray for that sort of money. It is the first I have heard of welding in fresh metal, and then covering with fibre-glass. Unless I am mis-understanding his use of the phrase fibre-glass in ...
- 01 May 2024, 21:26
- Forum: Mechanical
- Topic: Van Running wierd (popping) and erratic rev counter
- Replies: 9
- Views: 282
Re: Van Running wierd (popping) and erratic rev counter
Hopefully its something that simple for you..
- 01 May 2024, 21:13
- Forum: Any Other Matters
- Topic: Knocking from ventilation system
- Replies: 21
- Views: 6831
Re: Knocking from ventilation system
It wouldn't take that long.. a day tops. E D I T After reading into what was done.. If they've done welding and fab work that's probably where the time and money went. They've also done a fair bit more than just the dash by the look of it. Breaking the screen when refitting is easily done if you rus...
- 01 May 2024, 21:11
- Forum: Mechanical
- Topic: Van Running wierd (popping) and erratic rev counter
- Replies: 9
- Views: 282
Re: Van Running wierd (popping) and erratic rev counter
I'd clean the grounds in the engine bay. Maybe check the dissy cap and arm for damage, vac leaks, I know you said you checked the leads but when you check em give em a bit of a wiggle. I only say that as I had a misfire on my van very intermittent.. checked the leads all in spec, went through everyt...
- 01 May 2024, 21:00
- Forum: Any Other Matters
- Topic: Knocking from ventilation system
- Replies: 21
- Views: 6831
Re: Knocking from ventilation system
Bloody hell I removed a dash for a chap, replaced his heater box fan and wired his stereo for 80 quid all within about 4 hours. The screws can be a bit of a bugger along the top of the dash and the heaterbox fixings.. opening the heaterboxes takes time if they are still plastic welded.. but breaking...
- 01 May 2024, 13:02
- Forum: Mechanical
- Topic: MY engine timing
- Replies: 5
- Views: 183
Re: MY engine timing
TDC will be a larger U shaped notch, the v will be smaller. Take a picture and post it up here and will have a look.
The U shaped notch will on the largest pulley section closest to the block.
The U shaped notch will on the largest pulley section closest to the block.
- 01 May 2024, 12:46
- Forum: Mechanical
- Topic: Early Slding door Catch fouling on door card
- Replies: 19
- Views: 477
Re: Early Slding door Catch fouling on door card
When in doubt, give it a clout
Pretty sure I have a late catch off the syncro on the bodycut I saved for the roller channel..
Pretty sure I have a late catch off the syncro on the bodycut I saved for the roller channel..
- 30 Apr 2024, 20:59
- Forum: Mechanical
- Topic: Early Slding door Catch fouling on door card
- Replies: 19
- Views: 477
Re: Early Slding door Catch fouling on door card
A bit of swearing and hitting it with a hammer might sort it out
- 30 Apr 2024, 20:32
- Forum: Mechanical
- Topic: Early Slding door Catch fouling on door card
- Replies: 19
- Views: 477
Re: Early Slding door Catch fouling on door card
Looking at the two pictures of yours, jims and then mine yours looks bent out of shape.. so thats probably whats doing it.
- 30 Apr 2024, 20:28
- Forum: Mechanical
- Topic: Early Slding door Catch fouling on door card
- Replies: 19
- Views: 477
Re: Early Slding door Catch fouling on door card
I could try removing my spring see if its different to yours.
Who knows, mine might not be correct
Who knows, mine might not be correct
- 30 Apr 2024, 18:51
- Forum: Mechanical
- Topic: Early Slding door Catch fouling on door card
- Replies: 19
- Views: 477
Re: Early Slding door Catch fouling on door card
Now you've put both the pictures side by side yeah its bent out on slowcoaches.. maybe a savage bodge.. the spring might be the wrong way around as well..that 90 bend might be for the hole on the underside..
- 30 Apr 2024, 16:56
- Forum: Mechanical
- Topic: MY engine timing
- Replies: 5
- Views: 183
Re: MY engine timing
The V shaped one
- 30 Apr 2024, 16:48
- Forum: Mechanical
- Topic: Early Slding door Catch fouling on door card
- Replies: 19
- Views: 477
Re: Early Slding door Catch fouling on door card
Yeah late short handled one. Cross over year
- 30 Apr 2024, 13:47
- Forum: Mechanical
- Topic: Early Slding door Catch fouling on door card
- Replies: 19
- Views: 477
Re: Early Slding door Catch fouling on door card
Looks like your spring isn't where it should be