Club 80-90 Forums

Hi Aidan, From memory (a week ago 🙄) the outer bearings on both sides need pressing in equally. The inner bearing needed minimal convincing, one was defo easier to fit in than the other, so im guessing housing is worn as stated. I never used and bearing fit, lesson learned I guess. I will strip the ...

After completely rebuilding the rear suspension (including 2 brand new trailing arms 🙈) due to suspect worn bearings. I still have play, plenty of play. My question is, having changed the bearings and applied 500nm to the nuts, is it most likely yo be the bearing housing or stub axel at fault? Or mo...

Thanks guys. Sometimes the simplest problems have the simplest solutions

Hi all,
Does anyone have, or know where I can get a fuel filter clamp for my 88 jx diesel syncro.
I ordered a petrol one by mistake as it looked correct

What is the correct clamp for this location?



It certainly isn't this

A three legged puller, converted to tool 3032z (copyright pending).
For info, it took a 24 inch breaker bar to free it

VW 3032z.

So, having spent 2 days trying to get the pulley of my insitu injection pump (in order to replace it) with a rubbish puller, I need guidance.... again. Bentley mention tool 3032, does anyone local to the Midlands have such a thing or has anyone used an aletnative method? Please help, the ferry is bo...

Cheers for the info

Hi all,

Can anyone direct me towards the correct fuel line and clips (if any? As mine has none)
For the fuel return/leak of line on a jx setup?

Thanks

Perfect, thank you

'89 UK  1.6TD JX Im posting this in the syncro section because according to google, its a syncro specific part   :? https://www.onlinecarparts.co.uk/esen-skv-13739984.html My question is... what is it. There is nothing connected to what looks like a hose connection. Nothing connected to the electric...

The gate is removed so I can take it to auto glass but there is a stubborn part of me that wants to do it. I will take an angle grinder to the glass soon
 

Hi all, technically a Syncro specific question as the tailgate says “Syncro” :) I have now tried, unsuccessfully 10 times to refit the glass in my replacement tailgate. After the 1st five attempts I bought a seal from brickworks to replace the one from justKampers. The brickworks one looks and feels...

Hi all, hoping some light can be cast on the latest “issue” I have come across. I had the timing belt changed 18 months and 1500 miles ago by a “reputable garage” who also changed the water pump !!! I have noticed that there is a fair bit of cambelt dust/fibre when I removed the cover to inspect. St...

1.6 JX 14’ Syncro

hi everyone,

does anyone know if there is supposed to be a gasket between the inboard CV (driveshaft) and the drive flange on the transaxle? To stop the CV grease spinning out during use....

thanks, Rob