Club 80-90 Forums

Just to update, The engine fired up today after a few goes and ran ok, It was just due to earthing out the coil and maybe a bad earth,Thanks for all the replies and help from the forum.

Well we give it another try today but still no sparks so i am starting to suspect the hall sensor in the dizzy, I will draw out the wiring and post a picture just in case something is missing, I have a running T25 with the same engine and module so i think an option would be to swap bits from mine a...

Thanks, very much...now i can see it i have worked it out or at least i can see more chance of why no sparks were happening..

937carrera wrote:... and why are you providing an earth at the coil, page 3 of the wiring diagram ?

Oh i think i see what you are saying if i am earthing the coil it won't switch?

davidoft1 wrote:Got a picture of how you have it set up, could be an earth issue

I ran a separate earth to the block and direct to the coil and module.

Full wiring diagrams available here: http://syncrosport.com/info/wiring/ I assume you have and are using the multi connector for the ignition amplifier which is connected to the coil and hall sensor, and the correct dizzy ? All the bits came from 1 vehicle but it was never running when it arrived, ...

Today we tried to get a 1.9 water cooled from a T25 running outside of the vehicle to test, It turns over and does all the right things but we have no spark, The module and coils are all present and seem to be wired right as we followed the wires from another T25, But no matter what we tried it has ...

Just looking through the readers rides section and spotted a picture and wondered what the wheels on this users T25 are called?

Hi All this is my 1985 Caravelle GL Auto (DG) I'm not sure about the wood either. Bought Easter weekend Passed MOT this morning (No advisories) lots of lost sleep since easter out for first run 55 mile round trip to Orford Quay in Suffolk. No problems Regards Rick http://rickpiper.cbfsim.org/images...