Club 80-90 Forums

It’s a fairly easy job, i did mine , i used the existing battery to starter cable to feed the van electrics , adding a junction box where the battery was https://www.ebay.co.uk/itm/352121275580?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JR-KjFgAQfK&sssrc=2349624&ssuid=XFLw5t...

multisi wrote: ↑29 Jan 2023, 17:06 Whats the reason for the change ?

it will also allow for an easier install for a second leisure battery so the gas fridge can be easily replaced 
 

good evening all ive been quiet for a while but i know have a question......how much of a job is it to reposition the starting/cranking battery from under the drivers seat to the battery box rear nearside in engine bay......betty is a 1.9 dg 
thanks for any help/advice 

been tinkering in betty and got thinking......rear N/S in the engine bay is a space that looks like it could be for a battery does anyone know if this is the case and has anyone put a battery here 

Thank you for the advise and help its only been 6 yrs and a small but annoying problem

im looking for one to

Ok ive found the yellow/red wire (whats left of it) in the black juction box and the brown with thanks from the help.....the next question is.....is there a positive and neg on the sender.....with the plug attached they will only fit one way..the correct way....or is it just making a circuit connect...

From reading your other posts, you have a lot of electrical problems. Especially around the fuse box. As mentioned above - First things first - what van do you have? Early van or later van. - what model year? Petrol or diesel. - which engine is fitted? If you are talking temperature gauge sender, i...

Hi sorry..... 1.9 dg 1986 the wires below....im hoping have uploaded were connected to the carb temp sensor 🤔 but when disconnected and bridged operated the temp gauge indicating they are the coolant sensor wires i have traced them back into the black box where they connect to.....i believe a yellow...

can i start with an apology been quiet for a why as it looked like id been blocked.....thankfully and evidently not temp gauge doesnt work read a lot of useful and previous threads but can anyone tell me what the wiring should look like please.....for some reason the plug has been cut off the sensor...

hi there i hope someone in T25 land can help betty are 1.9 dg has started being......sick when fueling this only happens just before she is full...so dropped the tank and it was nasty to say the least on top so changed tank..sender unit...bypass's on the top.....fuel filler seal......grommets and an...

came across them by accident through work...... really really helpful very knowledgeable and very reasonably priced bought a number of parts off the since

hi all hope this is in the right section......can anyone advise the best place to buy new standard suspension for betty looking to do all four corners springs and damper heritage....just kampers all seem to be lowered/fast road/perforamce/spine busters......shes built for comfort :rollin many thanks...

we used seals direct for betty as we couldnt identify whos conversion bettys was....if that makes sense......huge selection, free catalog so you can match up, really fast delivery and excellent customer service