Club 80-90 Forums

Rocking or pulsing of the break pedal..... had this on mine .....bent rear drive shaft !!
Jack it up
Break it down
Start it up.... you'll soon see the deflection if it's there !

Hi I've an '86 1.9dg which we've lowered 40mm and according to Brickwerks there is eneough adjustment within the vehicle to allow for correction of the rear camber, with out the nead for shims. According to various bit n bobs on here, on Wiki and my Haynes book the trailing arm mountings are slotted...

Ok
The dash is out, to weld and paint the windscreen corners.
The blower motor already replaced
Am considering insulating behind here......any advice welcome, ta
Also any thing else I should look at ?

Thanks, Ian

So
My point is
For the gains available I would "Keep It Stupid Simply". (Kiss) and put the panels flat on the roof, unless you have a pop !

Pmsl

Ta !

Ps
Still can't get the hang of this photo upload thing

Solar is cool it goes well beyond " tree hugging" not that I have an issue with it ! Honest !
Have a look at this handy pic we use as a guide, it's basic but that's a good thing.

https://www.flickr.com/gp/148469178@N08/8s8317" onclick="window.open(this.href);return false;

Buy a good chain with "X" rings not "O" rings and use white grease or wax the best you can buy, this saves splashing oil all over the place.

Ok, excelent thanks guys, hoping to get this done whilst the weather is warm for max stickyness effect.

Gonna be changing my hi top to an Automes solid version, any one have an estimate on how many tubes of sealant I should order ! Also any other tips would be appreciated, ta

Hi I've also been looking at this option, as mine is also very high, this became an issue in France, when forced to take the motor way the new auto toll booths think your an 18wheeler, charge you so and discharge the ticket 10 ft off the ground ...LOL !! When stood inside I have about 12" head ...

Hi guys and gals Had the same issue, managed to clean the years of gunk off, looked great for a while, only for the goo to return. I think the plastic is breaking down causing the issue, thought I was cleaver doing the Mr steering sew over jobby. Alas this now is moving around and you can feel it is...

Any one know where I might find a flue kit for one of these? I've tried the normal places, I can get the flue pipes and "o" rings from Germany, so really it's the terminal that I require. The previous owner modified a fridge flue badly, I am surprised he was still alive to sell me the van....

I've always told them pesky dealers I don't take delivery with out it, as they rate it so highly it must be included in the package.