Club 80-90 Forums

I have the later type dash cluster. My alternator warning light is staying on. I’m getting 14.5 volts at the battery with the engine running so I think it is charging.
Pin 11 on the 14 way dash plug is alternator warming light. Should I also see 14.5 volts on that pin?

I’m pretty sure mine is the later type set up according to my chassis number and horizontal strip. Brickworks say out of stock on the pins , I’ll check with them tomorrow. I did repair my rev counter cluster with a Slaughter House Customs pcb replacement kit. When I fitted it today to replace the ba...

Am I able to fit the instrument cluster from my late ‘85 German market petrol van with rev counter and digital clock to my ‘88 Uk market petrol Doka with no rev counter , digital or analog clock? Is the 14 pin connector the same configuration? Also are pins available for the 14 pin connector ? A lot...

I’m going fir this stuck to the panels first https://www.ebay.co.uk/itm/10-sq-ft-FATMAT-RATTLETRAP-Thick-Car-Sound-Deadening-Proofing-Dynamat-Rlr-Avail/300634706120?epid=645967074&hash=item45ff3990c8:g:-8gAAOSw5L9XD5qk" onclick="window.open(this.href);return false; Then I’m insulting w...

Measurements and pictures of where the mounts are would be good

Im wanting the same information

I have a swivel seat base which i presumed was a Westfalia one. It does not have any guide bushes or any provision for guide bushes. These are the bushes that Brickwerks sell https://www.brickwerks.co.uk/guide-bush-kit-t3-westfalia-swivel-base.html" onclick="window.open(this.href);return f...

Is the T25 ignition lock barrel the same as any other VW's of the same era ie. Golf Mk 2? and are they interchangeable ? I cant find a new part listed for T25

Thanks Aiden, that sorted it

Can anybody tell me how to remove the lock barrel from a late sliding door handle? Thanks

I was wondering if it was actually of any use. When im driving i wont have passengers in the back needing to keep warm.

Can some one tell he how the heater tunnel is fixed at the front below the gear stick.
I can see 2 black caps, are there screw heads under there . They don’t seem to want to pop off ?

Just like this

Errr....no

I'm thinking of respraying my Syncro entirely with U-Pol Raptor bed liner paint. I have seen a pictures of a couple examples on the internet but not in the flesh. Think it might suit the look of the Syncro and be a tough finish that I don't have to worry about scratching when green laning. Another a...