Club 80-90 Forums

Quick question on this, there are two brake warning lights on the dash. Which one is the handbrake one, top or bottom. Mine has no wiring from the switch and I want to connect up. Photo taken of another van, neither of my warning lights have the markings shown on this one.

Anyone know a stockist of DOKA bodykits in Caravelle style, big bumpers and side planks (as called in Germany)

Found some at vw-winkler in a Germany but they are glue on side planks rather than clip on, would prefer the clip on type.

I've just gone for one of these http://www.vintagespeed.co.uk/index.php?page=shop.product_details&flypage=garden_flypage.tpl&product_id=211&category_id=48&option=com_virtuemart&Itemid=119" onclick="window.open(this.href);return false; Main reasons, my cast knuckle is kn...

Oil Pressure and Temperature Question. Had a recurrent buzzer of doom going off, so I temporarily earthed the signal from the dynamic oil pressure system and just relied on the red light. I have now installed VDO gauge with a twin sensor added between the cylinder heads on LH side of engine. The sta...

Ride height picture

Trying to add a picture but it won't let me attach, it's only 45kb....

Was convinced my T25 DOKA was lowered, I don't know by how much, but it looks lower and handles better than my old camper. Now comes the problem, one of my rear springs has snapped and it's failed MOT. A friend who's DOKA is lowered by 45mm with green H&R springs has a ride height of 21cm from t...

I put one of these in with oil pressure and a rev counter, they do LHD and RHD versions, mines a left hooker

https://www.brickwerks.co.uk/twin-gauge ... k-lhd.html" onclick="window.open(this.href);return false;

My 1991 T25 DOKA with a 2.1DJ has always run with the temp gauge in the middle of the gauge (12 o clock) or slightly towards 1 o clock. Now it reads at about 10 o clock and even sat in traffic a few weeks back on a warm day when the fan came on the radiator it wasn't much above this. Is this the sen...

Think I've found the part at Just Kampers...

2.1DJ engine

Help needed, took my throttle position sensor off to adjust the micro switch. In doing so I managed to lose the "knuckle" which the throttle cable passes through and is secured by.
Does anyone have one I can buy please, I'm sure it's not a readily available part.

Great help thank you...will have a look on Saturday..

The picture on the right is the underside of a standard TPS. The stud on the left hand side must be associated with the red circled holding screw, I cannot see how the adjusting screw moves the plate, it must be associated with that small hole??

See attached photo, the yellow circled Allen head is the adjustment screw. You loosen the red circled one and adjust with the yellow circled one.