what's the dimensions of the hole(s) ?
google oval rubber blanking grommet
Ebay amazon aliExpress etc...
Search found 7153 matches
- 20 May 2024, 16:08
- Forum: Bodywork, Seats & Glass
- Topic: Water in tailgate
- Replies: 10
- Views: 746
- 09 May 2024, 11:50
- Forum: Mechanical
- Topic: Coolant.
- Replies: 2
- Views: 108
Re: Coolant.
Expansion tank should be full There's a top up tank (which should be half full) behind the rear flap connected to the expansion tank via the pressure (darlek) cap, when excess pressure is required to escape it escapes into the top up tank, which has three vent holes on the top so excess coolant/stea...
- 07 May 2024, 08:41
- Forum: Electrical & Instrumentation
- Topic: Headlight switch
- Replies: 14
- Views: 431
Re: Headlight switch
I'd be checking the earth crowns, there's a few shared ones which when corroded can result in contact to earth not being made and power instead being diverted via hi beam led which is acting as one way valve as diodes are polarity sensitive
- 02 May 2024, 06:16
- Forum: Mechanical
- Topic: MY engine timing
- Replies: 5
- Views: 197
Re: MY engine timing
Markings do vary, my SA built 1990 DJ does't have the same markings as a German assembled one
- 29 Apr 2024, 19:55
- Forum: Mechanical
- Topic: Dowel on flywheel dg engine
- Replies: 7
- Views: 291
Re: Dowel on flywheel dg engine
Flywheel has a TDC pickup on the back , should be a pickup cable coming from the top of the case face the connector of which should be secured to the alternator, it only works with the original factory VW diagnostics tool/scanner; most engines that have been rebuilt have lost the sensor and cable an...
- 11 Apr 2024, 10:53
- Forum: Mechanical
- Topic: Ring and pinnion for 1.7D
- Replies: 3
- Views: 229
Re: Ring and pinnion for 1.7D
You don't have the power to pull taller gearing, the stock gearbox is matched to the engine, 1.7s were delivery vehicles, good acceleration up through the gears round town, great up to 50, not ideal as a mile munching motorway cruiser, so slow and steady holiday mode, hold up the traffic on a hill o...
- 11 Apr 2024, 10:42
- Forum: Mechanical
- Topic: Rear bearings, housing and stub axel issue - question
- Replies: 6
- Views: 386
Re: Rear bearings, housing and stub axel issue - question
bearing housings are same for 2wd and 14" Syncro, the 16" ones are different, bearing housing is a 211 part, so actually late bay, not T3 specific
- 11 Apr 2024, 07:41
- Forum: T25 Alternative Engine Forum
- Topic: AFN Dual mass flywheel ? can i use it ?
- Replies: 38
- Views: 16485
- 11 Apr 2024, 07:32
- Forum: Mechanical
- Topic: 2.1 DJ playing up when hot
- Replies: 29
- Views: 987
Re: 2.1 DJ playing up when hot
Bremi is a cheap coil, like £20 new, original Bosch was £150+, there will be a reason why its so cheap, and the fact it is rusty but not that old is suspicious, so that would be my first thing to check Original Bosch coil is nla, they don't make them like that any more, there are alternatives and go...
- 11 Apr 2024, 07:27
- Forum: Mechanical
- Topic: 2.1 DJ playing up when hot
- Replies: 29
- Views: 987
Re: 2.1 DJ playing up when hot
I'd start with checking you have good earths, to the shell and to the engine, then the service items, rotor arm, disi cap, spark plugs, even just visual check can be diagnostic, is the sprung centre contact good, are the four plug contacts intact, rotor arm tip not excessively eroded etc.. for examp...
- 10 Apr 2024, 20:25
- Forum: T25 Alternative Engine Forum
- Topic: AFN Dual mass flywheel ? can i use it ?
- Replies: 38
- Views: 16485
Re: AFN Dual mass flywheel ? can i use it ?
Sachs 2289 000 041, depending on source from £200 to £460.
On Monday I could get 62% off on Autodoc they were £222, today £278 on the app
Various listings on Ebay from UK sources
On Monday I could get 62% off on Autodoc they were £222, today £278 on the app
Various listings on Ebay from UK sources
- 10 Apr 2024, 20:09
- Forum: Electrical & Instrumentation
- Topic: Voltage Stabilizer
- Replies: 11
- Views: 494
Re: Voltage Stabilizer
afaik TCA 700Y is the original voltage regulator made by ITT in France, certainly that's what is in the dash I have for spares, and if you look for that specific electronic component you'll find them for £60+ but there's a listing on German Ebay for them for £13 plus shipping, but the listing is vis...
- 10 Apr 2024, 17:07
- Forum: Mechanical
- Topic: 2.1 DJ playing up when hot
- Replies: 29
- Views: 987
Re: 2.1 DJ playing up when hot
DJ is higher compression 2.1, originally designed for 4 star fuel, running a map based ignition system with only 4 input signals, air mass, air temp, water temp, timing from hall sender, using vacuum advance and retard for almost all the timing adjustment, ecu controls fuelling - nominally 112bhp on...
- 10 Apr 2024, 16:48
- Forum: Electrical & Instrumentation
- Topic: Voltage Stabilizer
- Replies: 11
- Views: 494
Re: Voltage Stabilizer
TCA 700Y regulators are available from Germany on Ebay for not too much money
I have a pre loved one available
I have a pre loved one available
- 10 Apr 2024, 07:44
- Forum: Mechanical
- Topic: Rear bearings, housing and stub axel issue - question
- Replies: 6
- Views: 386
Re: Rear bearings, housing and stub axel issue - question
did you use proper bearing fit (loctite 638 or similar) to secure the inner bearing into bearing carriers, did it just slip in or did it need proper pressing in ? There should be some play in the 6 and 12 position when cold, the rear bearings are plain bearings with a C3 clearance designed to be tru...